ngHobbies
AC2836-358 MOTOR 880KV
APM:Copter specific motor for heavier payloads, This motor is designed for 12x4.7 or 11x4.7 Propellers. The package now includes a new collet adapter. It is a M5x0.8 threaded shaft with a nut fastener.,
ngHobbies
HITEC SKYSCOUT P2GO W MOTOR, ESC, SERVOS
| Wingspan | 54.5 in. |
| Weight | 24.5 oz. |
| Length | 38.6 in. |
| Wing Area | 372 sq. in. |
| Wing Loading | 5.47 oz./sq.ft. |
Product Downloads:,
The SkyScout is available in three unique and convenient packages ...ngHobbies
MOTOR (LOOP) TEMPERATURE SENSOR
Manual:, eLogger Manual,
Loop-around temperature sensor measures temp up to 420 degrees F. ...ngHobbies
MOTOR ANGLE ADAPTER
Package contains:, - 2 adapters and necessary mounting screws., Documentation:, Click here,
These adapters are used to tilt the motors by a ...ngHobbies
HMC5883L - TRIPLE AXIS MAGNETOMETER
Features:, I2C interface with I2C translator for 5V signals compatibility 2.5 to 3.3V and 4V to 5.5V supply range (one at time, jumper selectable) Low current draw 4.35 milli-gauss resolution ArduIMU+ and ArduPilotMega Shield pin compatible., :, Click here,
This is a 3-axis digital compass board based on the ...ngHobbies
MOTOR ANGLE ADAPTER 2 DEGREES
Package contains:, - 2 adapters and necessary mounting screws., Documentation:, Click here,
These adapters are used to tilt the motors by a ...ngHobbies
FORCEFLY
| http | //nghobbies.com/forum/index.php?topic=100.0 |
Demo Video:, Features:, Fully programmable flight control:, Control the aircraft roll, pitch, and yaw (twist grip) with one hand, as well as throttle, programmable settings allow complete configuration of each axis – travel adjustment, dual rates, exponential, reverse, trim, etc., Force feedback control:, Active force feedback – pushes the flight stick according to changes in aircraft attitude, Gyro Stabilisation:, Mixes gyro feedback directly to control axes to provide automatic gyro flight stabilization, Model memory:, Save up to eight different models in the ForceFly, PPM Channel Assignment:, Assign any axis to any output channel, Interface ports:, Optional head tracker interface (also for future expansion), Pacakge content:, - ForceFly circuit, Fully Supported Joystick:, - Logitech G940 Flight System (Highest Recommandation), Limited Support for:, - Microsoft Sidewinder 2, Documentation:, Quick Start Manual:, Click here, Detailed user guide on Wiki:, Click Here, Support thread:, New Firmware:, On October 7th, 2011, Version 1.10 firmware has been released. The firmware can be uploaded to all revious Forcefly versions as well using the PicKit 3 programmer kit, available here:, Pickit 3, A full documentation for the firmware upgrade procedure is still pending, till then you can download the firmware by clicking on the following link:, Download Firmware Version 1.10,
The ForceFly is another exciting FPV tele-presence product from EMR ...ngHobbies
MEGA BRUSHLESS "SHORT" 400 MOTOR
: direct drive with 6x5 prop, 7 cells, 10,200 RPM, 5 Amps. With 6x5 prop, 8 cells, 11,500 RPM, 6 Amps.,
Same diameter as SPEED 400, 28mm, 29mm long, weight is ...ngHobbies
2 AXIS BRUSHLESS GIMBALL CONTROLLER
| http | //www.basecamelectronics.com/downloads/ |
Specifications:, USB connection for convenient firmware upload and configuration, Content:, This package contains all the items on the main picture:, Controller board,
The wires, headers and all the necessary connectors are pre-soldered ...ngHobbies
3 AXIS BRUSHLESS GIMBAL CONTROLLER
| http | //www.basecamelectronics.com/downloads/ |
Specifications:, USB connection for convenient firmware upload and configuration, Content:, This package contains all the items on the main picture:, Controller board,
The wires, headers and all the necessary connectors are pre-soldered ...ngHobbies
2 AXIS BRUSHLESS GIMBALL CONTROLLER (MARTINEZ)
| http | //sourceforge.net/projects/brushless-gimbal-brugi/ |
| http | //arduino.cc/en/main/software |
Specifications:, USB connection for convenient firmware upload and configuration, Content:, This package contains all the items on the main picture:, Controller board, Configuration tool and firmware updates:, The firmware has to be compiled and uploaded with the arduino software. Download the latest from here:,
The wires, headers and all the necessary connectors are pre-soldered ...ngHobbies
3 AXIS 32 BIT BRUSHLESS GIMBAL CONTROLLER
| http | //www.basecamelectronics.com/downloads/ |
Specifications:, 32 bit controller, Content:, This package contains all the items on the main picture:, Controller board,
This controller and associated IMU units are enclosed in plastic ...ngHobbies
MTO4628-470-MK MOTOR
| Diameter | 48mm |
| Height | 28mm |
| Weight | 115g |
| Battery cells supported | 3-6s |
| Internal resistance | 0.125 |
| No load current | 0.7A |
| Maximum current | 27A |
| Maximum power | 610W |
| Maximum thrust | 2480g |
Specifications:, KV: 470,
ngHobbies
MTO4228-620-MK MOTOR
| Diameter | 42mm |
| Height | 28.5mm |
| Weight | 85g |
| Battery cells supported | 3-6s |
| Internal resistance | 0.275 |
| No load current | 0.7A |
| Maximum current | 33A |
| Maximum power | 714W |
| Maximum thrust | 2400g |
Specifications:, KV: 620,
ngHobbies
MTO3536-800-MK MOTOR
| Diameter | 34.8mm |
| Height | 36mm |
| Weight | 100g |
| Battery cells supported | 3-6s |
| Internal resistance | 0.13 |
| No load current | 0.9A |
| Maximum current | 34A |
| Maximum power | 753W |
| Maximum thrust | 2440g |
Specifications:, KV: 800,